Logging workers typically do the following:
The cutting and logging of timber is done by a logging crew. The following are examples of types of logging workers:
Fallers cut down trees with hand-held power chain saws.
Buckers work alongside fallers, trimming the tops and branches of felled trees and bucking (cutting) the logs into specific lengths.
Tree climbers use special equipment to scale tall trees and remove their limbs. They carry heavy tools and safety gear as they climb the trees, and are kept safe by a harness attached to a rope.
Choke setters fasten steel cables or chains, known as chokers, around logs to be skidded (dragged) by tractors or forwarded by the cable-yarding system to the landing or deck area, where the logs are separated by species and type of product.
Rigging slingers and chasers set up and dismantle the cables and guy wires of the yarding system.
Log sorters, markers, movers, and chippers sort, mark, and move logs on the basis of their species, size, and ownership. They also tend machines that chip up logs.
Logging equipment operators use tree harvesters to fell trees, shear off tree limbs, and cut trees into desired lengths. They drive tractors and operate self-propelled machines called skidders or forwarders, which drag or transport logs to a loading area.
Log graders and scalers inspect logs for defects and measure the logs to determine their volume. They estimate the value of logs or pulpwood. These workers often use hand-held data collection devices into which they enter data about trees.
A logging crew might consist of the following members: